色花堂

 Jaw Crusher is suitable for primary and secondary crusher for material with compression strength less than 320MPA.

Jaw Crusher is of crushing ratio,  capacity,  final product size, simple structure, reliable performance, convenient maintenance, lower operation cost, etc.

It is widely used in mining, metallurgy, construction, highway, railroad, and water conservancy, etc.

FeaturesWhatsapp/Wechat:

1.advantageous crushing cavity design:

Adopts “v” -shaped crushing cavity and toggle plate with dip angle, which enable the feeding size and  utput capacity.

2. Strength

Adopts finite element analysis technology to optimize the movable jaw, the bearing seat is completely made of cast steel, which can ensure the match-up of the rack, increase the radial strength of the bearing seat and enable the whole machine to have  strength.

3. Quick and convenient for adjusting discharging opening size

ZXC series European Type Jaw Crusher adopts special adjusting device.

4. Choose bearing,  load capacity

Bearing ,  its  loading capacity and effective labyrinth seal will lengthen the service life of bearing.

5. Supporting bar under jaw plate effectively protects movable jaw and frame from being worn down.

Working PrincipleEmail:sales@色花堂.com

The electromotor drives the belt and pulley to make the movable jaw move back and forth, up and down through the eccentric shaft. The raw material is squashed or split when movable jaw plate moves towards fixed jaw together with movable jaw.

When movable jaw and movable jaw plate turn back by eccentric shaft and spring, the raw material, which is squashed or split before discharges from the bottom outlet under jaw plate.

The bulk-production comes true while electromotor rotates continuously and the movable jaw crushes and discharges the raw material periodically.

SpecificationWhatsapp/Wechat:

Model		ZXC80	ZXC96	ZXC106	ZXC116	ZXC110	ZXC120	ZXC125	ZXC140	ZXC145	ZXC150	ZXC160	ZXC200
Width of feed opening (mm)		800	930	1060	1150	1100	1200	1250	1400	1400	1500	1600	2000
Deepth of feed opening(mm)		510	580	700	800	850	870	950	1070	1100	1200	1200	1500
power (kw)		75	90	110	132	160	160	160	200	200	250	250	400
Eccentric shaft speed(rpm)		350	330	280	260	230	230	220	220	220	220	220	200
Weight(KG)		8060	11353	18700	19390	26150	28160	39239	47120	57723	74000	79993	121500
Output size (mm)	The tight side discharge opening	(t/h)
0-30	20
0-35	25
0-45	30
0-60	40	65-85
0-75	50	80-95
0-90	60	95-125	120-155
0-105	70	115-150	140-180	155-200	170-220	190-250	205-265
0-120	80	130-170	160-210	175-230	190-250	210-275	225-290
0-135	90	150-195	180-235	200-260	215-280	235-305	250-320
0-150	100	165-215	200-260	220-290	240-310	255-330	270-345	290-380
0-185	125	210-275	250-325	280-365	295-385	310-405	325-420	350-455	385-500	400-520
0-225	150	250-325	300-390	335-435	350-455	370-480	385-495	410-535	455-590	470-610	478-620	520-675
0-260	175	290-380	350-455	390-510	405-525	425-550	440-565	470-610	520-675	540-700	548-710	595-775	760-990
0-300	200			445-580	460-600	480-625	495-640	530-690	590-765	610-795	618-805	675-880	855-1110
0-340	225							590-770	655-850	680-885	688-895	750-975	945-1230
0-375	250							650-845	725-945	750-975	758-980	825-1070	1040-1350
0-410	275									820-1070	828-1075	900-1170	1130-1470
0-450	300										898-1160	980-1275	1225-1590